Sil-Poxy™ Features
- Can be used repairing torn silicone rubber molds.
- Will work with tin- or platinum-cure silicones
- Provides a strong, flexible bond
Instructions
Safety
Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Store and use material at room temperature (73°F/23°C).
This product has a limited shelf life and should be used as soon as possible.
A clean, dry surface is essential for successful adhesive bonding. If possible, abrade surface and follow with solvent wipe before applying.
Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.
Dispensing
Squeeze tube, taking care not allow air to enter tube before replacing cap. Unused product in tube exposed to air will cure quickly. Replace cap immediately after dispensing.
Applying
Apply adhesive to surface and mate parts. Material will begin to cure in about 5 minutes. Pieces can be handled after 1 hour depending on temperature and humidity. Full cure is attained after 24 hours.
Clean Up
Uncured Sil-Poxy™ can be removed from surfaces using isopropyl alcohol. Do not allow isopropyl alcohol to pool on silicone rubber surfaces.
Sil-Poxy™ Data:
Pot Life | 5 minutes |
Handling Time | 1 hour |
Shore Hardness | 40A |
Specific Gravity | 1.12 g/cc |
Color | Translucent |
Tensile Strength | 750 psi |
Elongation @ Break | 750 % |
Useful Temperature (min) | -50 °F |
Useful Temperature (max) | 500 °F |
Mixed Viscosity | Thick Paste |
Reviews
There are no reviews yet.