RE33 & HE33 – 5.4kg Processing
- Thorough mixing of the components is essential before dispensing into the mould.
- To obtain the correct pot life and Shore hardness the product is typically cast with both components at 25°C into a mould at ambient temperatures (20 – 25°C).
Pot life and demould time will decrease as:
- Resin/mould temperatures are increased (70-90◦C) and,
- The mass of the total casting is increased.
Winter conditions
The Part B may form crystals when stored at low ambient temperatures (below 15 – 20°C). In this case, the product must be heated to 60 – 70°C for the crystals to melt and then cooled down to 25°C before use. When Part B has been melted, it should be used as soon as possible. Do not heat Part B in excess of 70°C or store at 60° – 70°C for prolonged periods of time.
Storage and stability
RE33 Polyol is hygroscopic and must be stored in well-sealed containers at ambient temperatures of between 20-25◦C, away from direct sunlight. Containers must be sealed after use.
HE33 (CLF) is a diisocyanate and will react with moisture generating carbon dioxide. HE33 (CLF) has a shelf life of 6 months. Containers must therefore be tightly resealed after use to minimize moisture absorption. Using a “Gas-Blanket” is recommended.
Safety & Handling
RE33/HE33 (CLF) must be handled with care. Keep away from foodstuffs and handle with appropriate protective clothing.
Inhalation of fumes must be strictly avoided, and protective mask should be worn in a well-ventilated area. The safety procedures applicable to handling urethane raw materials must be read, understood and strictly adhered to.



