(011) 392-4232 Monday - Thursday 08:00 - 17:00 | Friday 08:00 - 16:30

Selected:

Prime™ 27 Fast – 1.28kg

R335.86

Prime™ 27 Fast – 1.28kg

R335.86

PRIME 27 is suitable for the female moulding of large, complex components incorporating advanced fibres such as carbon and aramid*. Typical projects include spars, hulls and reinforcing structures.
PRIME 27 offers outstanding performance in a variety of liquid infusion processes including SCRIMP, RIFT (resin infusion under flexible tooling), VARTM (vacuum assisted resin transfer moulding) and RTM (resin transfer moulding). PRIME 27 resin uses a wide range of hardeners to give a range of working times and cure speeds. This enables the gel time of the resin to be closely matched to the required infusion time for any particular size of moulded part. It achieves excellent mechanical and physical properties, including a high Tg from a moderate (50°) postcure. The system has an exceptionally low exotherm characteristic, which allows thick sections to be manufactured without risk of premature gelation due to exothermic heat build-up. This low exotherm will also extend the life of the mould tools.

No Safety Datasheet Available
R233.45

Prime™ 27 - Epoxy Infusion System - Resin 1kg

62 in stock

R102.41

Prime™ 27 - Epoxy Infusion System - Fast Hardener 280g

38 in stock

Add to Wishlist
Add to Wishlist

Description

¬ The lowest viscosity PRIME infusion resin
¬ Suitable for infusing structures that utilise carbon, aramid and glass fibres
¬ Good mechanical properties
¬ Very low exotherm in thick sections
¬ DNV-GL and Lloyds Register Certified Formats Available

Product Summary

50°C Cure16 Hrs
Max Tg120 °C
Shelf-life2 Years
Working Time10 Hrs
Mix Ratio100:28 pbw
CertificationDNV-GL, Lloyds
Close Menu
×

Cart